![Walther PDP 2.0 [2022] lemez | Shield RMSc lenyomat](http://www.optics-spot.hu/cdn/shop/files/Walther_PDP_2.0_optics_ready_plate_for_Shield_RMSc_footprint.webp?v=1750486873&width=1500)
![Brno ZKM 452 picatinny rail [11mm]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/ZKM_452_steel_scope_base_picatinny_rail_11mm_dovetail.jpg?v=1747402409)
E' un prodotto valido, ben realizzato, ma ho dovuto spingere un pò per farlo entrare in sede, tuttavia senza grandi problemi. Ottimo rapporto qualità-prezzo.
Grazie
1st class service all round.
Die Platte passt perfekt. Bei der Abwicklung des Kaufes und bei der Lieferung hat alles super funktioniert. Vielen Dank
![Walther PDP 2.0 [2022] plate | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Walther_PDP_2.0_optics_ready_plate_for_Shield_RMSc_footprint.webp?v=1750486873)
I spent A LOT of time researching the Nocturne- C and my new Shadow 2 carry so I can help the community learn. As you can see here, even most STAFF don’t know or care enough to say so… go to Night Fision and use the “p-series” (pictured below). Its time we start punishing these companies for not knowing their own products, sharing the information we have with each other, and finding a dealer that offers the best quality and price to us the FIRST time. Do NOT use this company or give them your money.
To clarify the situation - you asked us 2 days ago 'whether the p-09 nocturne sights will work on shadow 2 carry'.
We responded that they will not work.
You wrote back in similar manner as here (that is - very pasionately) that we advised wrongly.
But we did not advise wrongly. Why? Because although the sights are the same dovetail cut, they are different heights. So if you install Nocturne or Sig P320 sights on Shadow 2 Carry, they will technically fit, but on shooting range you will soon discover that you shoot higher than you are supposed to, when using such sights. The reason is that Carry has front sight 0.5mm lower.
In short - we advised you correctly because we were dealing with this question already too many times and knew the answer. Else we would not advise.
We are amazed that you decided to write us bad review because of our advise, but that is up to you.
Wish you well and if any further compatibility question, just let us know.
My order was not fulfilled and you have failed to respond to my inquiry. I expect a refund asap. Thanks
![1911 [Novak Cut] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/1911_Novak_Cut_red_dot_mount_with_Shield_RMSc_footprint.jpg?v=1756984262)
Hello,
I checked your order and it was dispatched the same day as ordered. It appears UPS was trying to contact for your import procedures but unsucessfully so it was not delivered. Also I could not have found any email from you regarding the shipment. Please write us at info@optics-spot.com and we will resolve
I am satisfied with the purchase
![Ruger Mark 22/45 [Lite & Tactical] adjustable sight set | with fiber optics type B](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Ruger_Mark_22-45_Lite_Tactical_adjustable_sight_set_with_fiber_optics_type_B.jpg?v=1759475051)
Thank you!
Solid, fits perfect.
I use Vector Optics Frenzy-X 1x24x29 GenII 6MOA Red Dot (SCRD-76) on my CZ Shadow 2 OR
Its perfect.
Thank you!
It fits well with Canik Mete SFX Pro and Primary arms Red dot.
Thank you!
Sig P320 X5 Legion, M17, M18 plate | Trijicon RMR footprint
Thank you!
Very good mount. Fits perfectly a Trijicon RMR red dot and a picatiny rail, without any play at all, the provided screws are of good quality. Just a perfect item at a very reasonnable price :-)
Thank you!
passt perfekt für die Glock 17 Mos und das Osight SE,
habe es sonst nirgends gefunden. Klare Kaufempfehlung
Danke schön!
CZ Shadow 2 red dot mount universal | type C
Thank you!
It's okay but it's not a immediate fit and will need some gun smiting to allow it yo fit.
Thank you for review! Unfortunately with some guns fitting is required. Most often it is resolved easily by removing little bit of the material from the bottom of the red dot mount. It because most guns have some tollerances. Sometimes the tollerances are higher, and then the mounts have difficult time sliding in without slight material removal on the side of mount.
Glad you were able to resolve and the product serves now.
